Axiom 100GBASE-CR4 QSFP28 to 4 SFP28 Passive DAC 0.5m
The Axiom 100GBASE-CR4 QSFP28 DAC cable delivers reliable high-speed connectivity for data center and enterprise networking environments. This passive DAC (Direct Attach Cable) connects QSFP28 ports to four SFP28 interfaces, enabling 100G bandwidth over a compact 0.5-meter length. Engineered for Juniper compatibility, this cable eliminates the need for active transceivers, reducing power consumption and operational costs while maintaining signal integrity. Ideal for rack-mounted switches, routers, and storage systems requiring dense, cost-effective 100G interconnects.
Key Features
- 100GBASE-CR4 passive DAC technology for direct port-to-port connectivity
- QSFP28 to 4 SFP28 configuration supports flexible network topologies
- 0.5-meter cable length optimized for short-reach data center deployments
- Juniper-compatible design ensures seamless integration with existing infrastructure
- Low-latency passive design eliminates active power requirements
- Durable copper construction rated for high-frequency signal transmission
- Cost-effective alternative to active transceivers and optical modules
Technical Specifications
| Specification |
Details |
| Manufacturer |
AXIOM |
| Part Number |
JNP-QSFP-DACBO-0-5M-AX |
| Cable Type |
100GBASE-CR4 Passive DAC |
| Connector Configuration |
QSFP28 to 4 SFP28 |
| Cable Length |
0.5 meters |
| Data Rate |
100 Gbps |
| Compatibility |
Juniper Networks |
| Technology |
Passive Direct Attach |
Frequently Asked Questions
What is a passive DAC cable and how does it differ from active options?
A passive DAC (Direct Attach Cable) uses copper conductors to connect network ports without active electronics or power consumption. Unlike active DACs or optical transceivers, passive cables reduce latency, eliminate heat generation, and lower total cost of ownership—making them ideal for short-reach 100G connections in data centers.
Is this QSFP28 DAC cable compatible with non-Juniper equipment?
While optimized for Juniper Networks devices, this 100GBASE-CR4 passive DAC follows industry-standard specifications. Compatibility depends on your specific switch or router model. Verify your equipment supports QSFP28-to-SFP28 breakout configurations before deployment.
What is the maximum recommended distance for this 0.5m passive DAC?
The 0.5-meter length is ideal for rack-to-rack or switch-to-storage connections within data center environments. Passive DACs typically support distances up to 5-7 meters depending on cable quality and environmental conditions, but shorter runs like this ensure optimal signal integrity and performance.
Can I use this cable for 100G QSFP28 DAC applications outside Juniper networks?
Yes, the 100GBASE-CR4 standard is vendor-neutral. This passive DAC works with any equipment featuring QSFP28 and SFP28 ports that support 100G breakout mode. Always consult your hardware documentation to confirm compatibility before purchase.
