MA754AM 4-Channel Amplifier - 75W
The marine A754 4-channel amplifier delivers a powerful 75-watt RMS to each of the front and rear speakers in a boat. You can also bridge the amp to 2-channel mode to drive a couple of subs with a 200-watt RMS or 3-channel mode to drive both a pair of full-range speakers and a subwoofer.
Speaker-level inputs allow this amplifier to integrate into almost any system, even one using a marine factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow users to dial in the perfect roll-off to best suit speaker placement and cabin acoustics.
Features:
- Compact size
- High and low-level input
- Variable crossover and bass boost
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Phase Switch
- RBC wired remote
- Class D amp technology
- Turn-on mode
General Specifications:
- 4-channel marine amplifier
- 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
- Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- Preamp and speaker-level inputs
- Preamp outputs
- Fuse rating
- 30A x 2
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- Dimensions (W x H x D) 320mm x 51.3mm x 180mm (12-5/8” x 2-1/16" x 7-1/8”)
What’s in the Box:
- One marine A754 4-channel amplifier
- 4 Bare wire-to-RCA adapters
- Four 30A ATO fuses (2 installed, 2 spare)
- Two JBL stickers
- Owner's Manual
- 4 Mounting screws (M4 x 53mm)
- 1 logo badge
